Supermicro Motherboard X12STH-LN4F

Giá: Liên hệ

Thông tin cơ bản :
1. Intel® Xeon®  E-2300 Processor, Single Socket LGA-1200 (Socket H5) supported, CPU supports Up to 95W TDP
2. Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz, in 4 DIMM slots
3. Intel® C256 controller for 8 SATA3 (6 Gbps) ports; RAID 0, 1, 5, 10
4. Quad LAN with Intel® Ethernet Controller I210
5. 1 x PCIe 4.0 x16, 1 x PCIe 4.0 x4 (in x8 slot), 1 x PCIe 3.0 x4 (in x8 slot). M.2 Interface: PCIe 3.0 x4, M.2 Form Factor: 2280, 22110, M.2 Key: M-Key

 
Main Specifications
Device Type Motherboard
Form Factor Micro-ATX
Dimensions (WxDxH) 9.6" x 9.6" (24.38cm x 24.38cm)
Processor
Compatible Processors 10th Generation Intel Pentium Processor, Intel Xeon E-2300 Processor
Compatible Socket Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP
Cache/Core 8 Core/16 Thread
System Memory
Memory Capacity 4 DIMM slots, Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz
Memory Type 3200/2933/2666MHz SDRAM
DIMM Sizes 4GB, 8GB, 16GB, 32GB
Memory Voltage 1.2V
Error Detection Corrects single-bit errors
On-Board Devices
Chipset Intel C256
SATA RAID Intel C256 controller for 8 SATA3 (6 Gbps) ports, RAID 0,1,5,10
IPMI ASPEED AST2600 BMC
Graphics ASPEED AST2600 BMC
Network Controllers Quad LAN with Intel Ethernet Controller I210
SATA 8 SATA3 (6Gbps) port
TPM 1 TPM Header
Input / Output
LAN 4 RJ45 Gigabit Ethernet LAN ports
USB(s) 6 USB 2.0 port(s) (4 via header, 2 rear), 5 USB 3.2 Gen1 port(s) (2 via header, 2 rear, 1 type A)
Video Output 1 VGA port
Serial Ports 2 COM Port(s) (1 header; 1 rear)
DOM 2 SATA DOM (Disk on Module) power connector support
Expansion / Connectivity
Expansion Slots Total (Free) 1 PCI-E 3.0 x4 (in x8 slot), 1 PCI-E 4.0 x16, 1 PCI-E 4.0 x4 (in x8 slot)
M.2 Key: M-key
  M.2 Interface: 1 PCI-E 3.0 x4
  Form Factor: 2280/22110
System BIOS
BIOS Type 256MB UEFI
BIOS Features ACPI 6.0, SMBIOS 2.7, Plug and Play (PnP), RTC (Real Time Clock) Wakeup, UEFI 2.7, USB Keyboard support, PCI 3.0
Management
Software SuperDoctor 5, NMI, SUM, SPM, Intel Node Manager, SSM, IPMI2.0, Watchdog
System Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations Power-on mode for AC power recovery, ACPI Power Management
FAN 6x 4-pin fan headers (up to 6 fans), Thermal control tachometer fan connectors, Fan speed control, 6 fans with tachometer status monitoring, Overheat LED indication
PC Health Monitoring
Voltage VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED UID/Remote UID, CPU / System Overheat LED
Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
Other Features WOL, UID, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ACPI power management
Environmental
Operating Environment Non-Operating Temperature Range: -40°C - 70°C (-40°F - 158°F)
  Operating Relative Humidity Range: 8% - 90% (non-condensing)
  Non-Operating Relative Humidity Range: 5% - 95% (non-condensing)
  Operating Temperature Range: 0°C - 50°C (32°F - 122°F)
Parts List
I/O Cables 4x CBL-0044L
I/O Shield 1x MCP-260-00164-0N

Đánh giá trung bình

0.0

(0 Đánh giá)

Chia sẻ Đánh giá




Đối tác - khách hàng